Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
ilive [2017/06/01 16:04]
mike
ilive [2017/06/01 16:09] (current)
mike
Line 16: Line 16:
  
 === Startup === === Startup ===
-  - Press “Power” button on FOH Power battery backup (near floor under console)+  - Press “Power” button on //FOH Power// battery backup (near floor under console)
   - After console boots up - Load your scene   - After console boots up - Load your scene
-      - BARRACKSROW - Church or Large Bands +      - BARRACKSROW - //Church or Large Bands// 
-      - Small Show - Small Groups, Prayer Nights, Q/As, other small events +      - Small Show - //Small Groups, Prayer Nights, Q/As, other small events// 
-      - CR - Celebrate Recovery +      - CR - //Celebrate Recovery// 
-  - Unmute PA - Control System Touch Panel +  - Unmute PA - //Control System Touch Panel// 
-Shutdown +=== Shutdown ​=== 
-Mute PA - Control System Touch Panel +  ​- ​Mute PA - //Control System Touch Panel// 
-Properly Power down Console - Press “Utility” button - “Power Down” on screen - “Power Down Surface” on Screen - Power Button on FOH Power +  ​- ​Properly Power down Console - Press **“Utility”** button - **“Power Down”** on screen - **“Power Down Surface”** on Screen - Power Button on //FOH Power// 
-Replace Dust Cover +  ​- ​Replace Dust Cover 
-Clear Stage - Put away all mics, cables, DIs, and stands+  ​- ​Clear Stage - Put away all mics, cables, DIs, and stands
    
-Routing +==== Routing ​==== 
-Inputs +=== Inputs ​=== 
-iMac Input - “MINI” +  ​* ​iMac Input - “MINI” 
-Headphone Jack - “⅛” ” +  ​* ​Headphone Jack - “⅛” ” 
-Wireless Mics +  ​* ​Wireless Mics 
-Handhelds - Hand1, Hand2 +      ​* ​Handhelds - Hand1, Hand2 
-Beltpacks - Belt1, Belt2 +      ​* ​Beltpacks - Belt1, Belt2 
-Worship Handhelds - WRLS1, WRLS2, WRLS3, WRLS4 +      ​* ​Worship Handhelds - WRLS1, WRLS2, WRLS3, WRLS4 
-Tracks - 8 tracks channels via Dante from Chris +  ​* ​Tracks - 8 tracks channels via Dante from Chris 
-Channel Strip +=== Channel Strip === 
-Select - Located above the fader +  ​* ​Select - //Located above the fader//  
-Selects channel for further operations +      ​* ​Selects channel for further operations 
-Press before taking other actions +      ​* ​Press before taking other actions 
-Gain - Top left of the Console +  ​* ​Gain - //Top left of the Console// 
-Turn down if red “Peak” light illuminates on channel +      ​* ​Turn down if red “Peak” light illuminates on channel 
-EQ - Center Left of the Console +  ​* ​EQ - //Center Left of the Console// 
-4 bands adjusted by Gain, Frequency, and Width (Q) +      ​* ​4 bands adjusted by Gain, Frequency, and Width (Q) 
-Compression - Center of the Console +  ​* ​Compression - //Center of the Console// 
-Adjusted by Threshold, Ratio, Attack, Release, Hold, and Gain +      ​* ​Adjusted by Threshold, Ratio, Attack, Release, Hold, and Gain 
-Fader - Divided into 2 banks of 4 layers each +  ​* ​Fader - //Divided into 2 banks of 4 layers each// 
-DCAs - Control level multiple individual channels +  ​* ​DCAs - //Control level multiple individual channels// 
-Drums - Control all drums (colored Yellow) +      ​* ​Drums - Control all drums (colored Yellow) 
-Vocal - Control all vocals (colored Red) **excludes handhelds/​beltpacks +      ​* ​Vocal - Control all vocals (colored Red) **excludes handhelds/​beltpacks 
-Inst - Controls all Instruments (colored Green) +      ​* ​Inst - Controls all Instruments (colored Green) 
-FX - Controls all Effects Returns (colored Purple) +      ​* ​FX - Controls all Effects Returns (colored Purple) 
-Outputs +=== Outputs ​=== 
-Klang +  ​* ​Klang 
-Standard Inputs - Pre-Routed (should cover 95% of needs) +      ​* ​Standard Inputs - //Pre-Routed (should cover 95% of needs)// 
-Additional Needs - Use “Klang” Aux by pressing the “Mix” button and increasing the faders of the desired inputs +      ​* ​Additional Needs - //Use “Klang” Aux by pressing the “Mix” button and increasing the faders of the desired inputs// 
-Avioms - Route 16 available channels via “Output” screen  +  ​* ​Avioms - Route 16 available channels via “Output” screen  
-FX/​Surrounds - Right Bank, Layer B +  ​* ​FX/​Surrounds - Right Bank, Layer B 
-Mix FX “Ip” using the “Mix” button +      ​* ​Mix FX “Ip” using the “Mix” button 
-“Surround” Aux sends to cinema surround speakers - Mix using “Mix” button +      ​* ​“Surround” Aux sends to cinema surround speakers - Mix using “Mix” button